ARECA (ARC-1300/2300/1600/2600) SATA/SAS Host Bus Adapter
RedHat Enterprise Linux AS/ES release 4 Update 5, x86_64 and i686(kernel 2.6.9-55.EL)

Driver User's Guide
======================================================================
======================================================================
Linux SCSI driver technical support 
mail address: support@areca.com.tw
Tel: 886-2-8797-4060
Fax: 886-2-8797-5970
Web site: www.areca.com.tw
======================================================================
======================================================================
 
**********************************************************************   
** 1. Contents                                                      **
**********************************************************************

readme.txt	- the readme file for ARC-1300/2300/1600/2600 driver
			RedHat Linux SATA/SAS Host Bus Adapter driver
install.zip	- ziped Areca Host Bus Adapter driver disk for system install(driver.img)
**********************************************************************
** 2. First installation                                            **
**********************************************************************
	A. Before Installation 
	
	  - Under DOS/Windows environment
	
		a. Unzip driver disk
			X:\PATH\pkunzip.exe install.zip =>> driver.img
		b. Dump it into a floppy disk.
			X:\PATH\rawrite.exe driver.img A:
			Tips: You can get rawrite.exe from RedHat installation CD/DVD
			"\dosutils" directory.  
			
	  - Under Unix enviroment
	  
		a.	              
			# unzip install.zip	   
		b.           
			# dd if=driver.img of=/dev/fd0

	B. Installation

		a. Booting from Installation CD/DVD #1 
		
		b. On "Welcome to Red Hat Linux" installation screen, a prompted lable "boot:"
			will appear at the bottom of the screen. According to the prompt, type in
			"text(or linux) dd" to tell linux we have a driver disk.
			
		c. You will be asked "Do you have a driver disk?", select "Yes".
		
		d. When prompted "Insert your driver disk and press OK to continue", insert the 
			driver diskette in the floppy drive and then select "OK".
			
		e. Driver of arcsas should be automaticlly loaded into kernel. The kernel 
			will find RAID Volume connected to you raid card, and continue installing 
			your system... 
**********************************************************************
** 3. Installing raid driver on an Existing System.                 **
**********************************************************************

CASE: if you do not attempt to compile driver source

		$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
		$$   extract arsas.ko from install.zip                  $$
		$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
		# mkdir /root/tmp
		# unzip install.zip
		# dd if=driver.img of=/dev/fd0
		# mount /dev/fd0 /mnt
		# cp /mnt/modules.cgz /root/tmp
		# cd /root/tmp
		# gzip -cd modules.cgz > modules.cpio
		# cat modules.cpio | cpio -i
		; you can get arsas.ko from 2.6.9-55.EL