Driver Disk Installation Guide for ARC-11XX/ARC12XX/ARC16XX/18XX RAID Controller 
on RHEL5.1(kernel 2.6.18-53.el5) x86_64 and x86 
=================================================================================
=================================================================================
Linux SCSI driver technical support 
mail address: support@areca.com.tw
Tel: 886-2-8797-4060
Fax: 886-2-8797-5970
Web site: www.areca.com.tw
==================================================================================
==================================================================================
 
**********************************************************************************   
1. Contents									**
**********************************************************************************

readme.txt	- the installation guide for ARC-11XX/12XX/16XX/18XX driver
		on RedHat AS release 5
arcmsr.1.20.0X.15-130311.zip	- source code(arcmsr.c, arcmsr.h, Makefile)
install.zip	- ziped Areca RAID driver disk for system install (driver.img)
**********************************************************************************
2. First installation								**
**********************************************************************************
	A. Before Installation 
		# unzip install.zip	   
		# dd if=driver.img of=/dev/fd0
	B. Installation
		a. Booting from Installation CDROM #1 
		b. On "Welcome to Red Hat Linux" installation screen, a prompted
			lable "boot:" will appear at the bottom of the screen.
			According to the prompt, type in "text(or linux) dd" to
			tell linux we have a driver disk.
		c. You will be asked "Do you have a driver disk?", select "Yes".
		d. When prompted "Insert your driver disk and press OK to continue",
			insert the driver diskette in the floppy drive and then
			select "OK".
		e. Driver of arcmsr should be automaticlly loaded into kernel.
			The kernel will find RAID Volume connected to you raid card,
			and continue installing your system... 
**********************************************************************************
3. Installing raid driver on an Existing System.				**
**********************************************************************************

	CASE 1: if you do not attempt to compile driver source
		$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
		$$   extract arcmsr.ko from install.zip                 $$
		$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

		#mkdir /root/tmp
		#unzip install.zip
		#dd if=driver.img of=/dev/fd0
		#mount /dev/fd0 /mnt
		#cp /mnt/modules.cgz /root/tmp
		#cd /root/tmp
		#gzip -cd modules.cgz > modules.cpio
		#cat modules.cpio | cpio -i
		; you can get arcmsr.ko from 2.6.18-53.el5 folder
	CASE 2: if you need to compile driver source
		$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
		$$  Method for RedHat official source kernel pack       $$
		$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

		RedHat Enterprise Linux 5 releases no longer includes the 
		kernel-source package. Therefore, users need to download
		kernel-2.6.18-53.el5.src.rpm to get the Linux source tree, 
		and then make Areca driver.		
		Users that require access to the kernel sources can find
		them through Google search or take the following steps:

		A: obtain the kernel-2.6.18-53.el5.src.rpm file from ftp site,
			#wget ftp://ftp.redhat.com/pub/redhat/linux/enterprise/
			5Server/en/os/SRPMS/kernel-2.6.18-53.el5.src.rpm
		B: add user, mockbuild,
			#useradd mockbuild
		C: install kernel-2.6.18-53.el5.src.rpm,
			#rpm -i kernel-2.6.18-53.el5.src.rpm 
		D: make the directory for "RPM build",
			#cd /usr/src/redhat/SPECS
			#rpmbuild -bp --target=`uname -m` kernel-2.6.spec
		E: copy the pre-built configuration file,
			#cd /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18-53.el5.<platform>
			#cp /boot/config-`uname -r` .config
		F: re-build your own system configuration,
			#make menuconfig
		G: change the new kernel's Extra Version info,
			#cd /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18-53.el5.<platform>
			#vi Makefile
				EXTRAVERSION =-custom
		H: build new kernel rpm,
			#cd /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18-53.el5.<platform>
			#make rpm
		I: install new kernel,	
			#cd /usr/src/redhat/RPMS/i386/
			#rpm -ivh kernel-2.6.18-custom.i386.rpm
		J: build new kernel ramdisk,
			#mkinitrd /boot/initrd-2.6.18-custom.img 2.6.18-custom
		K: add new items for new kernel into /boot/grub/grub.conf,
		and designate new kernel as the bootup default item,
			#vi /etc/grub.conf
			Example:
			@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
			@ default=0
			@ timeout=5
			@ ......
			@ title Red Hat Linux (2.6.18-53.el5)custom
			@	root (hd0,0)
			@	kernel /vmlinuz-2.6.18-53.el5-custom ro root=/dev/sda1
			@   	initrd /initrd-2.6.18-53.el5-custom.img
			@ title Red Hat Linux (2.6.18-53.el5)
			@	root (hd0,0)
			@	kernel /vmlinuz-2.6.18-53.el5 ro root=/dev/sda1
			@	initrd /initrd-2.6.18-53.el5.img
			@ ......
			@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
		L: reboot,
			#shutdown -r now
		M: enter the directory with arcmsr.c, arcmsr.h and Makefile, and then make the dirver,
			#cd arcmsr
			#make
		N: if you need the driver being inserted automatically after every reboot,
		make a new initrd image with the driver as following steps.		
			#cp arcmsr.ko /lib/modules/`uname -r`/kernel/drivers/scsi/arcmsr/
			#vi /etc/modprobe.conf, and add "alias scsi_hostadapter arcmsr"
			#mkinitrd -f -v /boot/initrd-2.6.18-53.el5.img 2.6.18-53.el5